Turbidity
EPA Compliant Benchtop Turbidity Meter - HI88703
The HI88703 is a high accuracy (±2% of reading plus 0.02 NTU) Turbidity Benchtop Meter. The meter is supplied complete with AMCO-AEPA-1 primary turbidity standards used for calibration and performance verification. The HI88703 meets and exceeds the requirements of EPA Method 180.1 and Standard Methods for the Examination of Water and Wastewater 2130 B for turbidity measurements.
• Up to ±0.02 NTU accuracy
• Ratio and non-ratio turbidity modes
• USB for data transfer
ISO 7027 Compliant Benchtop Turbidity Meter - HI88713
The HI88713 is a high accuracy benchtop turbidity meter. The meter is supplied complete with AMCO-AEPA-1 primary turbidity standards used for calibration and performance verification. The HI88713 meets and exceeds the requirements of the ISO 7027 Method for turbidimetric measurements.
• Compliant to ISO 7027 method
• Ratio and non-ratio turbidity modes
• USB for data transfer
EPA Compliant Benchtop Turbidity and Chlorine Meter - HI83414
The HI83414 is a high accuracy turbidity and chlorine benchtop meter. This meter is a combination of a nephelometer and photometer to measure the most important parameters in drinking water: turbidity and chlorine. The meter is supplied complete with AMCO-AEPA-1 primary turbidity standards and NIST traceable secondary chlorine standards used for calibration and performance verification. The HI83414 meets and exceeds the requirements of EPA Method 180.1 and Standard Methods for the Examination of Water and Wastewater 2130 B for turbidity measurements. For chlorine measurements an adaptation of EPA Method 330.5 and Standard Method 4500-Cl G is used.
• Compliant to EPA Methods
• Up to ±2% of reading plus 0.02 NTU accuracy
• USB for data transfer
Portable Turbidity and Bentonite Check Meter - HI83749
The HI83749 is a portable turbidity meter for the monitoring of protein stability and bentonite in wine. The meter is supplied complete with bentocheck reagent and AMCO-AEPA-1 primary turbidity standards. The bentocheck reagent is used to determine the amount of bentonite required to increase protein stability and the AMCO-AEPA-1 primary turbidity standards are used for calibration and performance verification of the meter.
• Fast Tracker™ Tag Identification System (T.I.S)
• USB for data transfer
• Operates on batteries or line voltage
Haze Turbidity Meter for Beer - HI847492
The HI847492 Haze Meter is a highly accurate portable meter for beer analysis that reflects HANNA's years of experience. The HI847492 is ASBC (American Society of Brewing Chemists) compliant, utilizing a nephelometer to test for turbidity caused by haze. The meter is specially designed for beer quality measurements, providing accurate and precise readings every time.
Compliant to ASBC methods
Signal averaging and continuous measurement mode
Fast Tracker™ Tag Identification System (T.I.S)
Turbidity (ISO) Portable Meter - HI98713
The HI98713 is a high accuracy portable turbidity meter. The meter is supplied complete with AMCO-AEPA-1 primary turbidity standards used for calibration and performance verification. The HI98713 meets and exceeds the requirements of the ISO 7027 Method for turbidimetric measurements.
• Fast Tracker™ - Tag Identification System (T.I.S)
• USB for data transfer
• Up to four-point calibration
Turbidity (EPA) and Chlorine Portable Meter - HI93414
The HI93414 is a high accuracy Turbidity and Chlorine Portable Meter. This meter is a combination of a nephelometer and photometer to measure the most important parameters in drinking water: turbidity and chlorine. The meter is supplied complete with AMCO-AEPA-1 primary turbidity standards and NIST traceable secondary chlorine standards used for calibration and performance verification. The HI93414 meets and exceeds the requirements of EPA Method 180.1 and Standard Methods for the Examination of Water and Wastewater 2130 B for turbidity measurements.The chlorine measurements are are adapted EPA Method 330.5 and Standard Method 4500-Cl G.
• Fast Tracker™ - Tag Identification System (T.I.S)
• USB for data transfer
• Operates on batteries or line voltage
Turbidity (EPA) Portable Meter - HI98703
The HI98703 is a high accuracy (±2% of reading plus 0.02 NTU) Turbidity Portable Meter. The meter is supplied complete with AMCO-AEPA-1 primary turbidity standards used for calibration and performance verification. The HI98703 meets and exceeds the requirements of EPA Method 180.1 and Standard Methods for the Examination of Water and Wastewater 2130 B for turbidity measurements.